2017 Grasshopper 725KT 52"
Call for Price
Designed for productivity and maximum versatility, the 725KT delivers the power and performance needed to handle the demands of daily commercial use.
Features & Benefits
- Built for Long Life: Robotically-welded, high-grade steel construction and I-beam reinforcement for long-lasting durability Centered-bearing design provides greater load-bearing capacity to easily handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance
- Kohler Command Pro Engine: 747 cc, 2-cylinder, air-cooled Kohler Command PRO V-Twin engine
- Single-fork Tail Wheel: Single-fork tail wheels enhance weight distribution, improve stability and enhance castering effect when maneuvering.
- QuikConverter™ Implement Capability: Add or remove implements in minutes without tools with QuikConverter™ Implement System Equip your out-front mower with a wide range of tools, including turf cleanup, renovation and snow removal implements that extend your productivity year-round
- Minimal Maintenance: Fewer than 10 grease points and easy top-side access to belts and filters 1,000-hour transmission fluid change intervals Self-tensioning belts minimize cost and labor on routine maintenance
- Heavy-duty Deck: Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge Specially designed cutting chambers enhance airflow for better cut quality Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength Spindle planes fabricated from double-layered, 7-gauge plus 10-gauge formed steel laminate that is 0.3138 inch thick 25.5 percent thicker than ½-inch steel Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion
- PowerFold® Electric Deck Lift: Standard on all FrontMount™ DuraMax® decks 48-inch and larger, PowerFold® is the zero-turn mower industry's first electric deck lift (introduced in 2004). PowerFold® rotates the deck nearly 90 degrees to provide easy access to the underside of the deck for simplified maintenance and mulching package installation, plus space-saving portability and storage. The feature also adjusts cutting height between 1.0 and 5.0 inches and controls deck lift functions using a single switch.
- Vigilant Operator Presence System™: Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt Dampened steering levers that return to neutral from forward and reverse Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position
- Ultimate Operator Station®: ComfortZone™ seat eliminates jostles and jolts with coil-spring suspension and a fully padded, high-back seat, padded armrests and variable density foam cushion. Iso-mounting smooths the ride, erases fatigue and keeps the operator comfortably in control at faster mowing speeds Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach One- or two handed operation with QuikAjust Tilt™ dual levers with 9-inch comfort range to custom fit operator's reach. Levers automatically return to neutral from either forward or reverse position and are less strenuous than riding mowers with steering wheels.
- Exclusive T-Drive™ Transmission: Tandem 12cc Parker pumps-in-reservoir transmission is specifically designed for turf-care applications In-line CoolFan™ cooling system and integrated, replaceable, high-efficiency fine-particle filter Design directs more power to the cutting deck as power-sapping components are eliminated
- AntiVibe Power Platform®: Isolates the engine and T-Drive™ from the operator platform for an unprecedented vibration-free experience
- LED Work Lights: LED work lights provide improved visibility in low light situations.
- Type/Horsepower/Cylinders: Kohler Command Pro, V-Twin
- Displacement: 45.6 cu. in. (747 cc)
- Lubrication System: Pressure Lube/Filter
- Crankshaft: Horizontal
- Cooling System: Air
- Fuel: Gasoline - unleaded
- Fuel Capacity: 7.2 U.S. Gal. (27.3 l)
- Optional Fuel Capacity: NA
- Air Cleaner: Heavy-duty, remote mounted, cyclonic, dual element air filtration.
- Muffler: Ultra quiet, single, industrial type
- Mulching Package #: 504567(52), 504569(61), 504571(72)
- Cutting Height Range: 1.0 to 5.0 in. (2.5cm to 12.7 cm)
- Construction (Robotic-Welded Steel): Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. 7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7 gauge skirts to withstand the brunt of commercial mowing.
- Blades (Tempered, Alloy Steel): (3) 18 in. (45.7 cm)
- Spindle Assemblies: Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
- Spindle Housings: 8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck.
- Blade Drive: Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
- Trimability (Outside of Std. Tire to Left Trim Side): 1.0 in. (2.5 cm)
Starter & Electrical System
- Battery (maintenance-free): 12 Volt
- Starter: Solenoid shift
- Ignition: Breakerless
- Interlock System: Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
- Seat: Ultimate Suspension Ride (USR) iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered premier suspension seat.
- Suspension: AntiVibe PowerPlatform™ with iso-mounted seat and footrest
- Console-mounted Instruments: Low engine oil pressure and parking brake warning lights, digital hour meter, work lights, ignition and push/pull PTO switches. Choke integrated with throttle lever.
- Work Lights: Optional - LED
- Hour Meter: Standard
Transmission & Steering
- Type: T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
- Filtration/Hydro Fluid: Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
- Speed: 0 - 9.0 mph (0 - 14.5 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
- Turning Radius: True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
- Steering: One- or two-hand operation with adjustable, HydraSmooth™, dual levers that automatically return to neutral from either forward or reverse position.
- Brakes: Dynamic braking through hydrostatic transmission.
- Parking Brake: Disc parking brakes, one for each drive wheel.
- Attachment Drive: Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
- Drive Wheels – Standard (4-ply rated): 22x11.00x10 bar tread, high flotation, 4-ply rated
- Drive Wheels – Optional (4-ply rated): 22x10.00x10, turf tread, 4-ply rated
- Single Tail Wheel: 13x6.50x6 rib tread, pneumatic (2)
- Deck Tires (4-ply rated): 9x3.50x4 (flat proof), 4-ply rated
- Height (Seat Back): 47.0 in. (119.4 cm)
- Height (Seat Cushion): 30.5 in. (77.5 cm)
- Height (ROPS): 69.0 in. (175.3 cm)
- Length (FrontMount w/ DuraMax Deck®): 105.5 in. (268.0 cm)
- Length (FrontMount Power Unit + DuraMax Deck®): 88.5 in. (224.8 cm)
- (Deck Raised - Flipped): 88.5 in. (224.8 cm)
- Deck Width (Side Discharge): 65.5 in. (166.5 cm)
- Deck Width (Mulch): 53.5 in. (135.9 cm)
- FrontMount PowerUnit Only (Width/Length): 50.0 in. (127.0 cm)/67.0 in. (170.2 cm)
- FrontMount Power Unit (Wheelbase): 51.5 in. (130.8 cm)
- (Uncrated): 1260 lbs. (571.5 kg)
- FrontMount Power Unit Only (uncrated): 890 lbs. (403.7 kg)
- FrontMount Deck Only - Side Discharge (uncrated): 370 lbs. (167.8 kg)
- Mulching Package: 29 lbs. (13.2 kg)
- Engine Manufacturer
- Kohler Command Pro
- Engine Type
- 45.6 cu. in. (747 cc)
- T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir,
- Wheel Size
- Fuel Capacity
- 7.2 U.S. Gal. (27.3 L)
- Deck Size
- 52 in.